HS External Sounder

The HS Range of external sirens feature a coloured translucent Polycarbonate outer cover fitted over a polycarbonate or metal backplate. The electronics modules are protected by a polycarbonate inner cover and conformally coated to withstand harsh environments.

Elmdene Fire and Security products

Benefits

  • Stylish External Sounder
  • Unique modern shape
  • Vertical mounting
  • Choice of models including economic Contractor model
  • Internal protection against harsh environments for long life
  • 'Engineer Friendly' for easy installation and maintenance
  • Low current consumption
  • Economic multiple installations
  • Individual Cover logo can be supplied

Features

  • Polycarbonate cover (3mm)
  • Electronics enclosed in polycarbonate or metal inner cover
  • Polycarbonate or metal backplate
  • Dual Piezo Sounders
  • Twin LEDs (selectable)
  • Single piezo and led on contractor model
  • 15 minute cut-off timer (selectable)
  • SAB facility with on-board 6v NiMH battery
  • Engineer mode for silent start-up
  • Front and back tampers
  • Optional foam detection
  • Screen printing available
Elmdene Fire and Security products
SPECIFICATION 700(M) 500(M) 500C
Grade 3 3 3
Environmental Class IV IV IV
       
No of Piezo's 2 2 1
Sound Output (dbA at 1m) 112 118 112
Operating Voltage - Nominal 12V-dc 12V-dc 12V-dc
Siren Operating Current 100mA 200mA 200mA
Strobe Operating Current 100mA 100mA 100mA
Standby - Quiescent Current 17mA 40mA 40mA
Cut Off Timer selectable selectable 15 min or none
LED's twin - selectable twin - selectable twin - fixed
Silent Engineer Mode yes yes n/a
Internal Battery 6V/300mA-NiMH 6V/300mAh-NiMH 6V/170mA-NiCad
Replaceable Battery yes yes yes
Siren Trigger neg pos/neg neg
Strobe Trigger neg neg neg
Strobe Flash Rate 1/sec 1/sec 1/sec
Tamper Detection cover/rear cover/rear/module cover/rear
Tamper Signal pos / neg / vf pos / neg / vf neg
Optional Foam Detection yes yes n/a
Drill Detection n/a n/a n/a
SAB/SCB sab/scb sab sab
Piezo/battery status monitor yes n/a n/a
Fault Output yes n/a n/a
Choice of 4 Tones yes n/a n/a
Audible Tamper Closure yes n/a n/a
Base Plate Polycarbonate (Galv steel) Polycarbonate (Galv steel) 3mm polycarbonate
Inner Cover Polycarbonate (Galv steel) Polycarbonate (Galv steel) ABS/Acrylic
Outer Cover 3mm polycarbonate 3mm polycarbonate 3mm polycarbonate
External Dimensions 280h x 320w x 65d 280h x 320w x 65d 280h x 320w x 65d
Screen Printing Available All Models All Models All Models
All Sounders comply with the following standards:
PD 6662:20004, EN50131-1:2004, EN50130-4, EN61000-6-3