Benefits
- Designed for European markets
- Approved in Belgium and the Netherlands
- High corrosion resistance using stainless steel and conformally coated boards
- Modular design for easy service
- Microprocessor design for power saving and feature selection
Features
- High Output Siren 120 dB( A) peak
- Stainless steel cover, inner cover and backplate
- 3mm polycarbonate lens
- Conformal coated board
- Low current - 500 mA max from panel
- Microprocessor controlled
- Two-way tamper - cover and rear
- Integral strobe - 1 Watt Xenon tube
- High security electronics module cover
- Recharge uses 2.1Ah or 7Ah Battery (not included)
- Active inrush current limit on strobe with power save
- Timeout of 8 minutes with 5 second test facility
 |
|
| 5000 | |
|---|---|
| Grade | n/a |
| Environmental Class | IV |
| Speakers | 1 |
| Sound Output (dbA at 1m) | 120 |
| Operating Voltage - Nominal | 12V-dc |
| Siren Operating Current | 400mA |
| Strobe Operating Current | 100mA |
| Standby - Quiescent Current | 17mA |
| Cut Off Timer | 5secs/8 minutes |
| LED's | n/a |
| Silent Engineer Mode | n/a |
| Internal Battery | 12V/2.1 or 7Ah lead acid (not supplied) |
| Replaceable Battery | yes |
| Siren Trigger | neg |
| Strobe Trigger | neg |
| Strobe Flash Rate | 1/sec |
| Tamper Detection | cover/rear |
| Tamper Signal | neg |
| Optional Foam Detection | n/a |
| Drill Detection | n/a |
| SAB/SCB | Direct or SCB |
| Piezo/battery status monitor | n/a |
| Fault Output | n/a |
| Choice of 4 Tones | n/a |
| Audible Tamper Closure | n/a |
| Base Plate | 1.2mm Stainless Steel |
| Inner Cover | 1.2mm Stainless Steel |
| Outer Cover | 1.2mm Stainless Steel |
| External Dimensions | 185w x 260h x 90d |
| Screen Printing Available | yes |
| Euro Siren complies with the following standards: | |
|---|---|
| INSERT: B-676-002 |