FS Range

The 'FS' range of power supplies has been designed for General Purpose applications including Access Control and CCTV, particularly where there is a requirement for volt free contacts to signal fault conditions.

Elmdene Fire and Security products

12 Volt dc Power Supply Units

The Range Consists of Four Models:

  • 1381FS 1.0A*
  • 1382FS 2.0A*
  • 1383FS 3.0A*
  • 1385FS 5.0A + 1.0A battery charging

*Full current to load plus additional 0.5A to charge standby battery

FOM 8 can be fitted to give 8 independent fused outputs, see ancillaries

'FS' Range Features:

  • Full Rated Current to Load + Battery Charging
  • Deep Discharge Protection
  • Battery Monitoring (1385FS only)
  • LED Indication
    • Mains Status
    • Output Fuse Failure
    • Battery Fault (1385FS only)
  • Volt Free Fault Output
    • Mains Fail
    • Output Fuse Failure
    • Battery Fault (1385FS only)
  • Electronic Overload Protection
  • Mains Transient Protection
  • Front and Rear Tamper Protection
Elmdene Fire and Security products
Output (mains on) 13.8V dc nominal
Load Output 1, 2, 3, 5 Amp
Max Battery Capacity 1x7Ah or 1x17Ah (Dependant on box size)
Mains Supply Mains Supply 230V +10%/-15%@50Hz
Environment -10C to 40C @ 95%RH
Enclosure:
Type A 200Hx230Wx80D - hinge lid*
Type B 330Hx355Wx80D - clam lid**
Type C 275Hx330Wx80D - hinge lid **
*'A' box will fit 1x7Ah battery
**‘B’ & ‘C’ box will fit 1x17Ah battery